C:\hudson\workspace\CC85xx-FW1.0.x-SystemTestSuite-AudioPrecisionTestSuite-Manual\AudioPrecisionTestSuite\bin\Debug\CC85xxSystemTestSuite.dll Root MbUnit v3 Assembly C:\hudson\workspace\CC85xx-FW1.0.x-SystemTestSuite-AudioPrecisionTestSuite-Manual\AudioPrecisionTestSuite\bin\Debug\CC85xxSystemTestSuite.DLL C:\hudson\workspace\CC85xx-FW1.0.x-SystemTestSuite-AudioPrecisionTestSuite-Manual\AudioPrecisionTestSuite\bin\Debug\CC85xxSystemTestSuite.DLL Texas Instruments, Inc Copyright © Texas Instruments, Inc 2010 1.0.0.0 CC85xxSystemTestSuite CC85xxSystemTestSuite 1.0.0.0 MbUnit v3.2 build 676 Fixture Test Test Test Fixture Test Fixture Test Fixture Test Fixture Test Fixture Test Fixture Test Test Test Fixture Test Fixture Test Fixture Espen Albrektsen espen@albrektsen.net Test Test Fixture Espen Albrektsen espen@albrektsen.net Test Test Test Test Fixture Test Fixture Test Fixture Test Fixture Test Fixture Espen Albrektsen espen@albrektsen.net This test is ignored - it was simply a test to check if we can easily download artifacts from Hudson Test Root MbUnit v3 Assembly C:\hudson\workspace\CC85xx-FW1.0.x-SystemTestSuite-AudioPrecisionTestSuite-Manual\AudioPrecisionTestSuite\bin\Debug\CC85xxSystemTestSuite.DLL C:\hudson\workspace\CC85xx-FW1.0.x-SystemTestSuite-AudioPrecisionTestSuite-Manual\AudioPrecisionTestSuite\bin\Debug\CC85xxSystemTestSuite.DLL Texas Instruments, Inc Copyright © Texas Instruments, Inc 2010 1.0.0.0 CC85xxSystemTestSuite CC85xxSystemTestSuite 1.0.0.0 MbUnit v3.2 build 676 Fixture Test

Resetting programmer... Info: Enumerating programmer(s)... Found 1! Resetting programmer no 1... Done! Info: SUCCESS! ]]>

Attenuation set to: 0dB. Info: 19-01-2011 11:15:53: ap2700> Amplitude set to: 0dB. Info: 19-01-2011 11:15:53: ap2700> Frequency set to: 1000Hz. Info: 19-01-2011 11:15:53: ap2700> Searching for COM port: Info: USB\VID_0451&PID_F500\06FF60551C4C2A17 : MSP-EXP430F5438 USB - Serial Port (COM7) 1 matching device(s) found. Info: COM port found at COM7 Info: 19-01-2011 11:15:53: ap2700> SetIO(M_CH_SEL,AD0)... Info: msp430 : response=IO_SET Info: 19-01-2011 11:15:54: ap2700> SetIO(M_I2S_SEL,AIC3101)... Info: msp430 : response=IO_SET Info: 19-01-2011 11:15:54: ap2700> SetIO(M_GIO12,1)... Info: msp430 : response=IO_SET ]]>

Attenuation set to: 0dB. Info: 19-01-2011 11:15:54: ap2700> Amplitude set to: 0dB. Info: 19-01-2011 11:15:54: ap2700> Frequency set to: 1000Hz. Info: 19-01-2011 11:15:54: ap2700> SetIO(M_CH_SEL,AD0)... Info: msp430 : response=IO_SET Info: 19-01-2011 11:15:55: ap2700> SetIO(M_I2S_SEL,AIC3101)... Info: msp430 : response=IO_SET Info: 19-01-2011 11:15:55: ap2700> SetIO(M_GIO12,1)... Info: msp430 : response=IO_SET ]]>

Generated ./PWP/config/BaseStation.ppwcfg succesfully. Info: 19-01-2011 11:15:55: xmlgen> Generated ./PWP/config/Speaker.ppwcfg succesfully. Info: 19-01-2011 11:15:55: ap2700> SetIO(M_RSTN,1)... Info: msp430 : response=IO_SET Info: 19-01-2011 11:15:56: ap2700> SetIO(SPI_SEL,MASTER)... Info: msp430 : response=IO_SET Info: 19-01-2011 11:15:56: ap2700> SetIO(DEBUG_EN,1)... Info: msp430 : response=IO_SET Info: 19-01-2011 11:15:56: config> Programming DUT: MASTER... Info: stderr:PwcTaskData/setAttr: Non-existing attribute "Maximum slave count" reqCompList=abuf,acsd,add_aic3101,aioa_pcm16_pcmlf,apc,dsc,ehif,ehif_nwk,ixd,mac,npsd,nvs,psd,spm,vcdm,waspm,wcdm,wncm dbCompList=abuf,acsd,add_aic3101,aioa_pcm16_pcmlf,apc,ehif,ixd,mac,npsd,nvs,pcbd,psd,spm,vcdm,waspm,wcdm,wncm dbCompList=abuf,acsd,add_aic3204,aioa_pcm16_pcmlf,apc,ehif,ixd,mac,npsd,nvs,pcbd,psd,spm,vcdm,waspm,wcdm,wncm dbCompList=abuf,acsd,add_digital,aioa_pcm16_pcmlf,apc,ehif,mac,npsd,nvs,pcbd,psd,spm,vcdm,waspm,wcdm,wncm dbCompList=abuf,acsd,add_aic3101,aioa_pcm16_pcmlf,apc,ehif,ixd,mac,npsd,nvs,pcbd,psd,spm,vcds,wasps,wcds,wncs_auto dbCompList=abuf,acsd,add_aic3204,aioa_pcm16_pcmlf,apc,ehif,ixd,mac,npsd,nvs,pcbd,psd,spm,vcds,wasps,wcds,wncs_auto dbCompList=abuf,acsd,add_digital,aioa_pcm16_pcmlf,apc,ehif,mac,npsd,nvs,pcbd,psd,spm,vcds,wasps,wcds,wncs_auto dbCompList=abuf,acsd,add_tas5708,aioa_pcm16_pcmlf,apc,ehif,ixd,mac,npsd,nvs,pcbd,psd,spm,vcds,wasps,wcds,wncs_auto dbCompList=abuf,acsd,add_tas5518,aioa_pcm16_pcmlf,apc,ehif,ixd,mac,npsd,nvs,pcbd,psd,spm,vcds,wasps,wcds,wncs_auto dbCompList=abuf,acsd,add_aic3101,aioa_pcm16_pcmlf,apc,dsc,ehif,ehif_nwk,ixd,mac,npsd,nvs,psd,spm,vcdm,waspm,wcdm,wncm Translating component abuf 00 02 02 00 00 00 00 Translating component acsd 02 00 ff ff ff 00 ff ff 01 00 06 01 ff ff 01 00 05 Translating component add_aic3101 ff 05 ff ff 0000fb24 0000fb0c 0000fad0 0000fa90 0000fa78 00000000 00000000 0000 0000 Translating component aioa_pcm16_pcmlf 01 03 00 00 00 00 01 01 01 10 01 00 Translating component apc 06e4 01 Translating component dsc 01 Translating component ehif 04 00 00 01 12345678 01010101 00 Translating component ehif_nwk Translating component ixd 00 Translating component mac Translating component npsd 0000 00 00 00 00 ff 00 0c 01 02 62 ff 02 64 00 ff 03 64 00 ff 04 02 10 02 50 ff ff Translating component nvs 01 00 00 20 00000000 02 01 00 20 00000000 00 00 00 00 00000000 Translating component psd fff98c40 Translating component spm 00 Translating component vcdm 0000 00 00 00 00 ff 00 0000 00 00 00 00 ff 00 0000 00 00 00 00 ff 00 0000 00 00 00 00 ff 00 00000900 0030 0000 fe70 0008 000a 0000 fe70 fe04 0008 0008 Translating component waspm 12345678 01010101 7fffe105 0a 0a 28 ff 04 05 ab Translating component wcdm 00 01 01 01 0500 0020 0008 0400 064b 0020 0008 0400 06e4 0020 0008 0400 0780 0020 0008 0400 0000 0000 0000 0000 Translating component wncm fffe 00 Info: Texas Instruments PurePath Wireless Programmer ---------------------------------------------- Programmer version: 1.0.4 (Build ID 33782) Database version: 1.0.4 (Build ID 33682) ---------------------------------------------- Load: Device configuration file '../.././PWP/config/BaseStation.ppwcfg' loaded Validate: OK Generate: OK Resetting... OK Erasing flash... OK Programming flash: % OK ******************************** Verifying flash... OK Resetting... OK CC85xx programming completed successfully OK Info: SUCCESS! Info: 19-01-2011 11:15:58: ap2700> SetIO(S_RSTN,1)... Info: msp430 : response=IO_SET Info: 19-01-2011 11:15:58: ap2700> SetIO(SPI_SEL,SLAVE)... Info: msp430 : response=IO_SET Info: 19-01-2011 11:15:59: ap2700> SetIO(DEBUG_EN,1)... Info: msp430 : response=IO_SET Info: 19-01-2011 11:15:59: config> Programming DUT: SLAVE... Info: stderr:reqCompList=abuf,add_aic3101,aioa_pcm16_pcmlf,apc,dsc,ehif,ehif_nwk,ixd,mac,npsd,nvs,psd,spm,vcds,wasps,wcds,wncs_ehif dbCompList=abuf,acsd,add_aic3101,aioa_pcm16_pcmlf,apc,ehif,ixd,mac,npsd,nvs,pcbd,psd,spm,vcdm,waspm,wcdm,wncm dbCompList=abuf,acsd,add_aic3204,aioa_pcm16_pcmlf,apc,ehif,ixd,mac,npsd,nvs,pcbd,psd,spm,vcdm,waspm,wcdm,wncm dbCompList=abuf,acsd,add_digital,aioa_pcm16_pcmlf,apc,ehif,mac,npsd,nvs,pcbd,psd,spm,vcdm,waspm,wcdm,wncm dbCompList=abuf,acsd,add_aic3101,aioa_pcm16_pcmlf,apc,ehif,ixd,mac,npsd,nvs,pcbd,psd,spm,vcds,wasps,wcds,wncs_auto dbCompList=abuf,acsd,add_aic3204,aioa_pcm16_pcmlf,apc,ehif,ixd,mac,npsd,nvs,pcbd,psd,spm,vcds,wasps,wcds,wncs_auto dbCompList=abuf,acsd,add_digital,aioa_pcm16_pcmlf,apc,ehif,mac,npsd,nvs,pcbd,psd,spm,vcds,wasps,wcds,wncs_auto dbCompList=abuf,acsd,add_tas5708,aioa_pcm16_pcmlf,apc,ehif,ixd,mac,npsd,nvs,pcbd,psd,spm,vcds,wasps,wcds,wncs_auto dbCompList=abuf,acsd,add_tas5518,aioa_pcm16_pcmlf,apc,ehif,ixd,mac,npsd,nvs,pcbd,psd,spm,vcds,wasps,wcds,wncs_auto dbCompList=abuf,acsd,add_aic3101,aioa_pcm16_pcmlf,apc,dsc,ehif,ehif_nwk,ixd,mac,npsd,nvs,psd,spm,vcdm,waspm,wcdm,wncm dbCompList=abuf,acsd,add_aic3204,aioa_pcm16_pcmlf,apc,dsc,ehif,ehif_nwk,ixd,mac,npsd,nvs,psd,spm,vcdm,waspm,wcdm,wncm dbCompList=abuf,acsd,add_digital,aioa_pcm16_pcmlf,apc,dsc,ehif,ehif_nwk,mac,npsd,nvs,psd,spm,vcdm,waspm,wcdm,wncm dbCompList=abuf,add_aic3101,aioa_pcm16_pcmlf,apc,dsc,ehif,ehif_nwk,ixd,mac,npsd,nvs,psd,spm,vcds,wasps,wcds,wncs_ehif Translating component abuf 00 00 00 00 02 02 00 Translating component add_aic3101 ff 05 ff ff 0000fb24 0000fb0c 0000fad0 0000fa90 0000fa78 00000000 00000000 0000 0000 Translating component aioa_pcm16_pcmlf 00 00 02 03 00 00 01 01 01 10 01 00 Translating component apc 06e4 00 Translating component dsc 00 Translating component ehif 04 00 00 00 12345678 abcd0123 00 Translating component ehif_nwk Translating component ixd 00 Translating component mac Translating component npsd 0000 00 00 00 00 ff 00 0c 01 02 62 ff 02 32 32 ff 03 64 00 ff 04 02 10 02 50 ff ff Translating component nvs 01 00 00 20 00000000 02 01 00 20 00000000 00 00 00 00 00000000 Translating component psd fff98440 Translating component spm 00 Translating component vcds 0000 00 00 00 00 ff 00 0000 00 00 00 00 ff 00 0000 00 00 00 00 ff 00 0000 00 00 00 00 ff 00 00000400 0000 fe70 0000 0008 0008 0000 fe04 0000 0008 000a Translating component wasps 12345678 abcd0123 7fffe105 Translating component wcds 01 01 01 0500 0020 0008 0000 064b 0020 0008 0000 06e4 0020 0008 0000 0780 0020 0008 0000 0000 0000 0000 0000 Translating component wncs_ehif Info: Texas Instruments PurePath Wireless Programmer ---------------------------------------------- Programmer version: 1.0.4 (Build ID 33782) Database version: 1.0.4 (Build ID 33682) ---------------------------------------------- Load: Device configuration file '../.././PWP/config/Speaker.ppwcfg' loaded Validate: OK Generate: OK Resetting... OK Erasing flash... OK Programming flash: % OK ******************************** Verifying flash... OK Resetting... OK CC85xx programming completed successfully OK Info: SUCCESS! Info: 19-01-2011 11:16:02: ap2700> PushButton(SLAVE_DUT,CSN)... Info: msp430 : response=BUTTON_PUSHED Info: 19-01-2011 11:16:02: ap2700> PushButton(MASTER_DUT,CSN)... Info: msp430 : response=BUTTON_PUSHED Info: 19-01-2011 11:16:03: ap2700> JoinChannels(FrontLeft,FrontRight)... Info: msp430 : response=DebugInfo(JoinNetworkMaster SW 0x8A4D) Info: 19-01-2011 11:16:04: ap2700> CMD_OK... Info: Info: INFO: JoinNetworkMaster SW 0x8A4D... Info: Info: 19-01-2011 11:16:04: ap2700> DBG_OK... Info: msp430 : response=DebugInfo(JoinNetworkSlave SW 0x8B4C) Info: 19-01-2011 11:16:06: ap2700> CMD_OK... Info: Info: INFO: JoinNetworkSlave SW 0x8B4C... Info: Info: 19-01-2011 11:16:06: ap2700> DBG_OK... Info: msp430 : response=CHANNELS_JOINED Info: 19-01-2011 11:16:06: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B4F) Info: 19-01-2011 11:16:06: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B4F) Info: 19-01-2011 11:16:06: access> F4 - C1 x C2 - Network was paired - verifying that WASP_CONN is set on MASTER_DUT. PASSED! Info: 19-01-2011 11:16:06: ap2700> SetChannelUsage(FrontLeft,UserDefined1)... Info: msp430 : response=STATUS_WORD(0x8B4D) Info: 19-01-2011 11:16:07: ap2700> Amplitude set to: 0dB. Info: 19-01-2011 11:16:07: ap2700> Amplitude set to: -6dB. Info: 19-01-2011 11:16:09: ap2700> Left channel amplitude is: -90,61dB and right channel amplitude is: -87,61dB. Info: 19-01-2011 11:16:09: access> F4 - C1 x C2 - Measuring amplitude on FrontLeft (SideLeft, Subwoofer) vs. (FrontLeft, UserDefined1) in Host controlled operation mode. PASSED! Info: 19-01-2011 11:16:09: access> F4 - C1 x C2 - Measuring amplitude on UserDefined1 (SideLeft, Subwoofer) vs. (FrontLeft, UserDefined1) in Host controlled operation mode. PASSED! ]]> Turning power off USB port 1... Info: stderr: INFO: individual power switching. WARN: Port indicators are NOT supported. Info: Hub #0 at bus-0:002 Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0100 power Port 5: 0000.0103 power enable connect Port 6: 0000.0100 power Port 7: 0000.0100 power Found CCDebugger(1236) on hub. Opening device #0. Send control message (REQUEST=1, FEATURE=8, INDEX=5) Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0100 power Port 5: 0000.0000 Port 6: 0000.0100 power Port 7: 0000.0100 power Info: 19-01-2011 11:15:34: ap2700> Turning power on USB port 1... Info: stderr: INFO: individual power switching. WARN: Port indicators are NOT supported. Info: Hub #0 at bus-0:002 Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0100 power Port 5: 0000.0000 Port 6: 0000.0100 power Port 7: 0000.0100 power Found CCDebugger(1236) on hub. Opening device #0. Send control message (REQUEST=3, FEATURE=8, INDEX=5) Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0100 power Port 5: 0000.0100 power Port 6: 0000.0100 power Port 7: 0000.0100 power Info: 19-01-2011 11:15:34: ap2700> Waiting for USB-UART interface... Info: Done! ]]>