C:\hudson\workspace\CC85xx-FW1.0.x-SystemTestSuite-AudioPrecisionTestSuite\AudioPrecisionTestSuite\bin\Release\CC85xxSystemTestSuite.dll Root MbUnit v3 Assembly C:\hudson\workspace\CC85xx-FW1.0.x-SystemTestSuite-AudioPrecisionTestSuite\AudioPrecisionTestSuite\bin\Release\CC85xxSystemTestSuite.DLL C:\hudson\workspace\CC85xx-FW1.0.x-SystemTestSuite-AudioPrecisionTestSuite\AudioPrecisionTestSuite\bin\Release\CC85xxSystemTestSuite.DLL Texas Instruments, Inc Copyright © Texas Instruments, Inc 2010 1.0.0.0 CC85xxSystemTestSuite CC85xxSystemTestSuite 1.0.0.0 MbUnit v3.2 build 676 Fixture Test Fixture Test Fixture Test Fixture Test Fixture Test Fixture Test Fixture Test Test Test Fixture Test Fixture Test Fixture Espen Albrektsen espen@albrektsen.net Test Test Fixture Espen Albrektsen espen@albrektsen.net Test Test Test Test Fixture Test Fixture Test Fixture Test Fixture Test Fixture Espen Albrektsen espen@albrektsen.net This test is ignored - it was simply a test to check if we can easily download artifacts from Hudson Test Root MbUnit v3 Assembly C:\hudson\workspace\CC85xx-FW1.0.x-SystemTestSuite-AudioPrecisionTestSuite\AudioPrecisionTestSuite\bin\Release\CC85xxSystemTestSuite.DLL C:\hudson\workspace\CC85xx-FW1.0.x-SystemTestSuite-AudioPrecisionTestSuite\AudioPrecisionTestSuite\bin\Release\CC85xxSystemTestSuite.DLL Texas Instruments, Inc Copyright © Texas Instruments, Inc 2010 1.0.0.0 CC85xxSystemTestSuite CC85xxSystemTestSuite 1.0.0.0 MbUnit v3.2 build 676 Fixture Test Turning power off USB port 1... Info: Found CCDebugger(1236) on hub. Opening device #0. Info: 19-01-2011 12:06:52: ap2700> Turning power on USB port 1... Info: Found CCDebugger(1236) on hub. Opening device #0. Info: 19-01-2011 12:06:53: ap2700> Waiting for USB-UART interface... Info: Done! Info: 19-01-2011 12:07:01: lbrick> Attenuation set to: 0dB. Info: 19-01-2011 12:07:01: ap2700> Amplitude set to: 0dB. Info: 19-01-2011 12:07:01: ap2700> Frequency set to: 1000Hz. Info: 19-01-2011 12:07:01: ap2700> Searching for COM port: Info: USB\VID_0451&PID_F500\06FF60551C4C2A17 : MSP-EXP430F5438 USB - Serial Port (COM7) 1 matching device(s) found. Info: COM port found at COM7 Info: 19-01-2011 12:07:01: ap2700> SetIO(M_CH_SEL,AD0)... Info: msp430 : response=IO_SET Info: 19-01-2011 12:07:02: ap2700> SetIO(M_I2S_SEL,AIC3101)... Info: msp430 : response=IO_SET Info: 19-01-2011 12:07:02: ap2700> SetIO(M_GIO12,1)... Info: msp430 : response=IO_SET Info: 19-01-2011 12:07:02: lbrick> Attenuation set to: 0dB. Info: 19-01-2011 12:07:02: ap2700> Amplitude set to: 0dB. Info: 19-01-2011 12:07:02: ap2700> Frequency set to: 1000Hz. Info: 19-01-2011 12:07:03: ap2700> SetIO(M_CH_SEL,AD1)... Info: msp430 : response=IO_SET Info: 19-01-2011 12:07:03: ap2700> SetIO(M_I2S_SEL,PSIA)... Info: msp430 : response=IO_SET Info: 19-01-2011 12:07:03: ap2700> SetIO(M_GIO12,1)... Info: msp430 : response=IO_SET Info: 19-01-2011 12:07:03: xmlgen> Generated ./PWP/config/BaseStation.ppwcfg succesfully. Info: 19-01-2011 12:07:03: xmlgen> Generated ./PWP/config/Speaker.ppwcfg succesfully. Info: 19-01-2011 12:07:04: ap2700> SetIO(M_RSTN,1)... Info: msp430 : response=IO_SET Info: 19-01-2011 12:07:04: ap2700> SetIO(SPI_SEL,MASTER)... Info: msp430 : response=IO_SET Info: 19-01-2011 12:07:04: ap2700> SetIO(DEBUG_EN,1)... Info: msp430 : response=IO_SET Info: 19-01-2011 12:07:04: config> Programming DUT: MASTER... Info: stderr:PwcTaskData/setAttr: Non-existing attribute "Maximum slave count" reqCompList=abuf,acsd,add_digital,aioa_pcm16_pcmlf,apc,ehif,mac,npsd,nvs,psd,spm,vcdm,waspm,wcdm,wncm dbCompList=abuf,acsd,add_aic3101,aioa_pcm16_pcmlf,apc,ehif,ixd,mac,npsd,nvs,pcbd,psd,spm,vcdm,waspm,wcdm,wncm dbCompList=abuf,acsd,add_aic3204,aioa_pcm16_pcmlf,apc,ehif,ixd,mac,npsd,nvs,pcbd,psd,spm,vcdm,waspm,wcdm,wncm dbCompList=abuf,acsd,add_digital,aioa_pcm16_pcmlf,apc,ehif,mac,npsd,nvs,pcbd,psd,spm,vcdm,waspm,wcdm,wncm Translating component abuf 00 02 02 00 00 00 00 Translating component acsd 02 00 ff ff ff 00 ff ff 01 00 00 01 ff ff 01 00 01 Translating component add_digital ff 05 ff ff 00000000 00000000 00000000 00000000 00000000 00000000 00000000 0000 0000 Translating component aioa_pcm16_pcmlf 00 00 01 03 00 00 01 01 01 10 01 00 Translating component apc 06e4 01 Translating component ehif ff 00 00 01 12345678 01010101 00 Translating component mac Translating component npsd 0000 64 0a 14 02 0c 00 0c 01 02 62 ff 02 64 00 ff 03 64 00 ff 04 02 10 02 50 ff ff Translating component nvs 01 00 00 20 85200001 02 01 00 10 0000ff88 03 01 10 10 00000000 00 00 00 00 00000000 Translating component psd fff9ecdf Translating component spm 01 Translating component vcdm 0000 00 00 00 00 ff 00 0000 00 00 00 00 ff 00 0000 00 00 00 00 ff 00 0000 00 00 00 00 ff 00 00000090 0030 0000 fe70 0008 000a 0000 fe70 fe04 0008 0008 Translating component waspm 12345678 01010101 7fffe005 0a 0a 28 ff 04 05 ab Translating component wcdm 01 00 01 01 0500 0040 0004 0400 064b 0040 0004 0400 06e4 0040 0004 0400 0780 0040 0004 0400 0000 0000 0000 0000 Translating component wncm 03e8 01 Info: Texas Instruments PurePath Wireless Programmer ---------------------------------------------- Programmer version: 1.0.4 (Build ID 33782) Database version: 1.0.4 (Build ID 33682) ---------------------------------------------- Load: Device configuration file '../.././PWP/config/BaseStation.ppwcfg' loaded Validate: OK Generate: OK Resetting... OK Erasing flash... OK Programming flash: % OK ******************************** Verifying flash... OK Resetting... OK CC85xx programming completed successfully OK Info: SUCCESS! Info: 19-01-2011 12:07:06: ap2700> SetIO(S_RSTN,1)... Info: msp430 : response=IO_SET Info: 19-01-2011 12:07:06: ap2700> SetIO(SPI_SEL,SLAVE)... Info: msp430 : response=IO_SET Info: 19-01-2011 12:07:07: ap2700> SetIO(DEBUG_EN,1)... Info: msp430 : response=IO_SET Info: 19-01-2011 12:07:07: config> Programming DUT: SLAVE... Info: stderr:reqCompList=abuf,acsd,add_digital,aioa_pcm16_pcmlf,apc,ehif,mac,npsd,nvs,psd,spm,vcds,wasps,wcds,wncs_auto dbCompList=abuf,acsd,add_aic3101,aioa_pcm16_pcmlf,apc,ehif,ixd,mac,npsd,nvs,pcbd,psd,spm,vcdm,waspm,wcdm,wncm dbCompList=abuf,acsd,add_aic3204,aioa_pcm16_pcmlf,apc,ehif,ixd,mac,npsd,nvs,pcbd,psd,spm,vcdm,waspm,wcdm,wncm dbCompList=abuf,acsd,add_digital,aioa_pcm16_pcmlf,apc,ehif,mac,npsd,nvs,pcbd,psd,spm,vcdm,waspm,wcdm,wncm dbCompList=abuf,acsd,add_aic3101,aioa_pcm16_pcmlf,apc,ehif,ixd,mac,npsd,nvs,pcbd,psd,spm,vcds,wasps,wcds,wncs_auto dbCompList=abuf,acsd,add_aic3204,aioa_pcm16_pcmlf,apc,ehif,ixd,mac,npsd,nvs,pcbd,psd,spm,vcds,wasps,wcds,wncs_auto dbCompList=abuf,acsd,add_digital,aioa_pcm16_pcmlf,apc,ehif,mac,npsd,nvs,pcbd,psd,spm,vcds,wasps,wcds,wncs_auto Translating component abuf 00 00 00 00 02 02 00 Translating component acsd 02 00 ff ff ff ff ff 00 00 00 00 ff ff 01 00 00 01 Translating component add_digital ff 05 ff ff 00000000 00000000 00000000 00000000 00000000 00000000 00000000 0000 0000 Translating component aioa_pcm16_pcmlf 00 00 02 03 00 00 01 01 01 10 01 00 Translating component apc 06e4 00 Translating component ehif ff 00 00 00 12345678 abcd0123 00 Translating component mac Translating component npsd 0000 64 0a 14 02 0c 00 0c 01 02 62 ff 02 32 32 ff 03 64 00 ff 04 02 10 02 50 ff ff Translating component nvs 01 00 00 20 009ca970 02 01 00 10 00000000 03 01 10 10 00000000 00 00 00 00 00000000 Translating component psd fff9e45f Translating component spm 01 Translating component vcds 0000 00 00 00 00 ff 00 0000 00 00 00 00 ff 00 0000 00 00 00 00 ff 00 0000 00 00 00 00 ff 00 00000000 0000 fe70 0000 0008 0008 0000 fe04 0000 0008 000a Translating component wasps 12345678 abcd0123 7fffe005 Translating component wcds 01 01 01 0500 0040 0004 0000 064b 0040 0004 0000 06e4 0040 0004 0000 0780 0040 0004 0000 0000 0000 0000 0000 Translating component wncs_auto 044c 00000000 00000000 00000000 Info: Texas Instruments PurePath Wireless Programmer ---------------------------------------------- Programmer version: 1.0.4 (Build ID 33782) Database version: 1.0.4 (Build ID 33682) ---------------------------------------------- Load: Device configuration file '../.././PWP/config/Speaker.ppwcfg' loaded Validate: OK Generate: OK Resetting... OK Erasing flash... OK Programming flash: % OK ******************************** Verifying flash... OK Resetting... OK CC85xx programming completed successfully OK Info: SUCCESS! Info: 19-01-2011 12:07:10: ap2700> PushButton(SLAVE_DUT,SW2)... Info: msp430 : response=BUTTON_PUSHED Info: 19-01-2011 12:07:11: ap2700> PushButton(MASTER_DUT,SW2)... Info: msp430 : response=BUTTON_PUSHED Info: 19-01-2011 12:07:11: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0F) Info: 19-01-2011 12:07:11: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0F) Info: 19-01-2011 12:07:12: access> S1 - C4 - Network was paired - verifying that WASP_CONN is set on MASTER_DUT. PASSED! Info: 19-01-2011 12:07:12: ap2700> SetIO(M_GIO12,0)... Info: msp430 : response=IO_SET Info: 19-01-2011 12:07:12: ap2700> Sample rate set to: 31936Hz. Info: 19-01-2011 12:07:14: access> S1 - C4 - Measuring THD+N on i2s_in vs. i2s_out @ 31936Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:07:14: access> S1 - C4 - Measuring output amplitude on i2s_out @ 31936Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:07:15: ap2700> Sample rate set to: 31962Hz. Info: 19-01-2011 12:07:17: access> S1 - C4 - Measuring THD+N on i2s_in vs. i2s_out @ 31962Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:07:17: access> S1 - C4 - Measuring output amplitude on i2s_out @ 31962Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:07:17: ap2700> Sample rate set to: 31987Hz. Info: 19-01-2011 12:07:19: access> S1 - C4 - Measuring THD+N on i2s_in vs. i2s_out @ 31987Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:07:20: access> S1 - C4 - Measuring output amplitude on i2s_out @ 31987Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:07:20: ap2700> Sample rate set to: 32013Hz. Info: 19-01-2011 12:07:22: access> S1 - C4 - Measuring THD+N on i2s_in vs. i2s_out @ 32013Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:07:23: access> S1 - C4 - Measuring output amplitude on i2s_out @ 32013Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:07:23: ap2700> Sample rate set to: 32038Hz. Info: 19-01-2011 12:07:25: access> S1 - C4 - Measuring THD+N on i2s_in vs. i2s_out @ 32038Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:07:25: access> S1 - C4 - Measuring output amplitude on i2s_out @ 32038Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:07:25: ap2700> Sample rate set to: 32064Hz. Info: 19-01-2011 12:07:27: access> S1 - C4 - Measuring THD+N on i2s_in vs. i2s_out @ 32064Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:07:28: access> S1 - C4 - Measuring output amplitude on i2s_out @ 32064Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:07:28: ap2700> Sample rate set to: 40194Hz. Info: 19-01-2011 12:07:30: access> S1 - C4 - Measuring THD+N on i2s_in vs. i2s_out @ 40194Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:07:30: access> S1 - C4 - Measuring output amplitude on i2s_out @ 40194Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:07:30: ap2700> Sample rate set to: 40226Hz. Info: 19-01-2011 12:07:32: access> S1 - C4 - Measuring THD+N on i2s_in vs. i2s_out @ 40226Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:07:33: access> S1 - C4 - Measuring output amplitude on i2s_out @ 40226Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:07:33: ap2700> Sample rate set to: 40259Hz. Info: 19-01-2011 12:07:34: access> S1 - C4 - Measuring THD+N on i2s_in vs. i2s_out @ 40259Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:07:35: access> S1 - C4 - Measuring output amplitude on i2s_out @ 40259Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:07:35: ap2700> Sample rate set to: 40291Hz. Info: 19-01-2011 12:07:37: access> S1 - C4 - Measuring THD+N on i2s_in vs. i2s_out @ 40291Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:07:38: access> S1 - C4 - Measuring output amplitude on i2s_out @ 40291Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:07:38: ap2700> Sample rate set to: 40324Hz. Info: 19-01-2011 12:07:40: access> S1 - C4 - Measuring THD+N on i2s_in vs. i2s_out @ 40324Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:07:40: access> S1 - C4 - Measuring output amplitude on i2s_out @ 40324Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:07:40: ap2700> Sample rate set to: 40356Hz. Info: 19-01-2011 12:07:42: access> S1 - C4 - Measuring THD+N on i2s_in vs. i2s_out @ 40356Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:07:43: access> S1 - C4 - Measuring output amplitude on i2s_out @ 40356Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:07:43: ap2700> Sample rate set to: 44012Hz. Info: 19-01-2011 12:07:45: access> S1 - C4 - Measuring THD+N on i2s_in vs. i2s_out @ 44012Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:07:45: access> S1 - C4 - Measuring output amplitude on i2s_out @ 44012Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:07:45: ap2700> Sample rate set to: 44047Hz. Info: 19-01-2011 12:07:47: access> S1 - C4 - Measuring THD+N on i2s_in vs. i2s_out @ 44047Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:07:48: access> S1 - C4 - Measuring output amplitude on i2s_out @ 44047Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:07:48: ap2700> Sample rate set to: 44082Hz. Info: 19-01-2011 12:07:50: access> S1 - C4 - Measuring THD+N on i2s_in vs. i2s_out @ 44082Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:07:50: access> S1 - C4 - Measuring output amplitude on i2s_out @ 44082Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:07:51: ap2700> Sample rate set to: 44118Hz. Info: 19-01-2011 12:07:53: access> S1 - C4 - Measuring THD+N on i2s_in vs. i2s_out @ 44118Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:07:53: access> S1 - C4 - Measuring output amplitude on i2s_out @ 44118Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:07:53: ap2700> Sample rate set to: 44153Hz. Info: 19-01-2011 12:07:55: access> S1 - C4 - Measuring THD+N on i2s_in vs. i2s_out @ 44153Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:07:56: access> S1 - C4 - Measuring output amplitude on i2s_out @ 44153Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:07:56: ap2700> Sample rate set to: 44188Hz. Info: 19-01-2011 12:07:58: access> S1 - C4 - Measuring THD+N on i2s_in vs. i2s_out @ 44188Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:07:58: access> S1 - C4 - Measuring output amplitude on i2s_out @ 44188Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:07:58: ap2700> Sample rate set to: 47904Hz. Info: 19-01-2011 12:08:00: access> S1 - C4 - Measuring THD+N on i2s_in vs. i2s_out @ 47904Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:08:01: access> S1 - C4 - Measuring output amplitude on i2s_out @ 47904Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:08:01: ap2700> Sample rate set to: 47942Hz. Info: 19-01-2011 12:08:03: access> S1 - C4 - Measuring THD+N on i2s_in vs. i2s_out @ 47942Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:08:04: access> S1 - C4 - Measuring output amplitude on i2s_out @ 47942Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:08:04: ap2700> Sample rate set to: 47981Hz. Info: 19-01-2011 12:08:06: access> S1 - C4 - Measuring THD+N on i2s_in vs. i2s_out @ 47981Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:08:06: access> S1 - C4 - Measuring output amplitude on i2s_out @ 47981Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:08:06: ap2700> Sample rate set to: 48019Hz. Info: 19-01-2011 12:08:08: access> S1 - C4 - Measuring THD+N on i2s_in vs. i2s_out @ 48019Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:08:09: access> S1 - C4 - Measuring output amplitude on i2s_out @ 48019Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:08:09: ap2700> Sample rate set to: 48058Hz. Info: 19-01-2011 12:08:11: access> S1 - C4 - Measuring THD+N on i2s_in vs. i2s_out @ 48058Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:08:11: access> S1 - C4 - Measuring output amplitude on i2s_out @ 48058Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:08:12: ap2700> Sample rate set to: 48096Hz. Info: 19-01-2011 12:08:13: access> S1 - C4 - Measuring THD+N on i2s_in vs. i2s_out @ 48096Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:08:14: access> S1 - C4 - Measuring output amplitude on i2s_out @ 48096Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:08:14: access> S1 - C4 - Sample rate limits. PASSED! Info: 19-01-2011 12:08:14: ap2700> Sample rate set to: 44106Hz. Info: 19-01-2011 12:08:14: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0F) Info: 19-01-2011 12:08:15: ap2700> ClearStatusWord(MASTER_DUT,1)... Info: msp430 : response=STATUS_WORD(0x8B0F) Info: 19-01-2011 12:08:15: access> S1 - C1 x C2 x C3 - Input sample rate changed - verifying that EVT_SR_CHG is set on MASTER_DUT. PASSED! Info: 19-01-2011 12:08:15: ap2700> GetStatusWord(SLAVE_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0D) Info: 19-01-2011 12:08:15: ap2700> ClearStatusWord(SLAVE_DUT,1)... Info: msp430 : response=STATUS_WORD(0x8B0D) Info: 19-01-2011 12:08:15: access> S1 - C1 x C2 x C3 - Input sample rate changed - verifying that EVT_SR_CHG is set on SLAVE_DUT. PASSED! Info: 19-01-2011 12:08:15: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0E) Info: 19-01-2011 12:08:16: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on MASTER_DUT. PASSED! Info: 19-01-2011 12:08:16: ap2700> GetStatusWord(SLAVE_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0C) Info: 19-01-2011 12:08:16: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on SLAVE_DUT. PASSED! Info: 19-01-2011 12:08:18: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 44106Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:08:18: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 44106Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:08:18: ap2700> InjectClockError(BCLK_STUCK_LOW,290)... Info: msp430 : response=ERROR_INJECTED Info: 19-01-2011 12:08:21: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 44106Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:08:21: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 44106Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:08:24: ap2700> Sample rate set to: 43201Hz. Info: 19-01-2011 12:08:25: ap2700> Left channel amplitude is: -219,71dB and right channel amplitude is: -219,71dB. Info: 19-01-2011 12:08:25: ap2700> Sample rate set to: 32033Hz. Info: 19-01-2011 12:08:26: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0F) Info: 19-01-2011 12:08:26: ap2700> ClearStatusWord(MASTER_DUT,1)... Info: msp430 : response=STATUS_WORD(0x8B0F) Info: 19-01-2011 12:08:26: access> S1 - C1 x C2 x C3 - Input sample rate changed - verifying that EVT_SR_CHG is set on MASTER_DUT. PASSED! Info: 19-01-2011 12:08:26: ap2700> GetStatusWord(SLAVE_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0D) Info: 19-01-2011 12:08:27: ap2700> ClearStatusWord(SLAVE_DUT,1)... Info: msp430 : response=STATUS_WORD(0x8B0D) Info: 19-01-2011 12:08:27: access> S1 - C1 x C2 x C3 - Input sample rate changed - verifying that EVT_SR_CHG is set on SLAVE_DUT. PASSED! Info: 19-01-2011 12:08:27: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0E) Info: 19-01-2011 12:08:27: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on MASTER_DUT. PASSED! Info: 19-01-2011 12:08:27: ap2700> GetStatusWord(SLAVE_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0C) Info: 19-01-2011 12:08:27: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on SLAVE_DUT. PASSED! Info: 19-01-2011 12:08:29: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 32033Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:08:30: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 32033Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:08:30: ap2700> InjectClockError(BCLK_STUCK_HIGH,709)... Info: msp430 : response=ERROR_INJECTED Info: 19-01-2011 12:08:32: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 32033Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:08:33: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 32033Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:08:35: ap2700> Sample rate set to: 31532Hz. Info: 19-01-2011 12:08:37: ap2700> Left channel amplitude is: -135,42dB and right channel amplitude is: -135,42dB. Info: 19-01-2011 12:08:37: ap2700> Sample rate set to: 48056Hz. Info: 19-01-2011 12:08:37: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0F) Info: 19-01-2011 12:08:37: ap2700> ClearStatusWord(MASTER_DUT,1)... Info: msp430 : response=STATUS_WORD(0x8B0F) Info: 19-01-2011 12:08:38: access> S1 - C1 x C2 x C3 - Input sample rate changed - verifying that EVT_SR_CHG is set on MASTER_DUT. PASSED! Info: 19-01-2011 12:08:38: ap2700> GetStatusWord(SLAVE_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0D) Info: 19-01-2011 12:08:38: ap2700> ClearStatusWord(SLAVE_DUT,1)... Info: msp430 : response=STATUS_WORD(0x8B0D) Info: 19-01-2011 12:08:38: access> S1 - C1 x C2 x C3 - Input sample rate changed - verifying that EVT_SR_CHG is set on SLAVE_DUT. PASSED! Info: 19-01-2011 12:08:38: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0E) Info: 19-01-2011 12:08:38: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on MASTER_DUT. PASSED! Info: 19-01-2011 12:08:39: ap2700> GetStatusWord(SLAVE_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0C) Info: 19-01-2011 12:08:39: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on SLAVE_DUT. PASSED! Info: 19-01-2011 12:08:41: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 48056Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:08:41: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 48056Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:08:42: ap2700> InjectClockError(WCLK_STUCK_HIGH,962)... Info: msp430 : response=ERROR_INJECTED Info: 19-01-2011 12:08:45: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 48056Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:08:45: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 48056Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:08:48: ap2700> Sample rate set to: 48427Hz. Info: 19-01-2011 12:08:49: ap2700> Left channel amplitude is: -210,17dB and right channel amplitude is: -210,17dB. Info: 19-01-2011 12:08:49: ap2700> Sample rate set to: 47974Hz. Info: 19-01-2011 12:08:49: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0E) Info: 19-01-2011 12:08:50: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on MASTER_DUT. PASSED! Info: 19-01-2011 12:08:50: ap2700> GetStatusWord(SLAVE_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0C) Info: 19-01-2011 12:08:50: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on SLAVE_DUT. PASSED! Info: 19-01-2011 12:08:52: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 47974Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:08:52: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 47974Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:08:52: ap2700> InjectClockError(BCLK_GLITCH,767)... Info: msp430 : response=ERROR_INJECTED Info: 19-01-2011 12:08:55: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 47974Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:08:56: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 47974Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:08:58: ap2700> Sample rate set to: 47161Hz. Info: 19-01-2011 12:09:00: ap2700> Left channel amplitude is: -135,42dB and right channel amplitude is: -135,42dB. Info: 19-01-2011 12:09:00: ap2700> Sample rate set to: 40242Hz. Info: 19-01-2011 12:09:00: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0F) Info: 19-01-2011 12:09:00: ap2700> ClearStatusWord(MASTER_DUT,1)... Info: msp430 : response=STATUS_WORD(0x8B0F) Info: 19-01-2011 12:09:00: access> S1 - C1 x C2 x C3 - Input sample rate changed - verifying that EVT_SR_CHG is set on MASTER_DUT. PASSED! Info: 19-01-2011 12:09:01: ap2700> GetStatusWord(SLAVE_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0D) Info: 19-01-2011 12:09:01: ap2700> ClearStatusWord(SLAVE_DUT,1)... Info: msp430 : response=STATUS_WORD(0x8B0D) Info: 19-01-2011 12:09:01: access> S1 - C1 x C2 x C3 - Input sample rate changed - verifying that EVT_SR_CHG is set on SLAVE_DUT. PASSED! Info: 19-01-2011 12:09:01: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0E) Info: 19-01-2011 12:09:01: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on MASTER_DUT. PASSED! Info: 19-01-2011 12:09:01: ap2700> GetStatusWord(SLAVE_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0C) Info: 19-01-2011 12:09:02: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on SLAVE_DUT. PASSED! Info: 19-01-2011 12:09:04: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 40242Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:09:04: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 40242Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:09:04: ap2700> InjectClockError(BCLK_STUCK_LOW,648)... Info: msp430 : response=ERROR_INJECTED Info: 19-01-2011 12:09:07: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 40242Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:09:07: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 40242Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:09:10: ap2700> Sample rate set to: 39781Hz. Info: 19-01-2011 12:09:11: ap2700> Left channel amplitude is: -219,71dB and right channel amplitude is: -200,62dB. Info: 19-01-2011 12:09:11: ap2700> Sample rate set to: 44157Hz. Info: 19-01-2011 12:09:12: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0F) Info: 19-01-2011 12:09:12: ap2700> ClearStatusWord(MASTER_DUT,1)... Info: msp430 : response=STATUS_WORD(0x8B0F) Info: 19-01-2011 12:09:12: access> S1 - C1 x C2 x C3 - Input sample rate changed - verifying that EVT_SR_CHG is set on MASTER_DUT. PASSED! Info: 19-01-2011 12:09:12: ap2700> GetStatusWord(SLAVE_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0D) Info: 19-01-2011 12:09:12: ap2700> ClearStatusWord(SLAVE_DUT,1)... Info: msp430 : response=STATUS_WORD(0x8B0D) Info: 19-01-2011 12:09:13: access> S1 - C1 x C2 x C3 - Input sample rate changed - verifying that EVT_SR_CHG is set on SLAVE_DUT. PASSED! Info: 19-01-2011 12:09:13: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0E) Info: 19-01-2011 12:09:13: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on MASTER_DUT. PASSED! Info: 19-01-2011 12:09:13: ap2700> GetStatusWord(SLAVE_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0C) Info: 19-01-2011 12:09:13: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on SLAVE_DUT. PASSED! Info: 19-01-2011 12:09:15: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 44157Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:09:15: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 44157Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:09:16: ap2700> InjectClockError(BCLK_STUCK_LOW,986)... Info: msp430 : response=ERROR_INJECTED Info: 19-01-2011 12:09:18: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 44157Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:09:19: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 44157Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:09:22: ap2700> Sample rate set to: 44613Hz. Info: 19-01-2011 12:09:23: ap2700> Left channel amplitude is: -219,71dB and right channel amplitude is: -219,71dB. Info: 19-01-2011 12:09:23: ap2700> Sample rate set to: 44184Hz. Info: 19-01-2011 12:09:23: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0E) Info: 19-01-2011 12:09:23: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on MASTER_DUT. PASSED! Info: 19-01-2011 12:09:23: ap2700> GetStatusWord(SLAVE_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0C) Info: 19-01-2011 12:09:24: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on SLAVE_DUT. PASSED! Info: 19-01-2011 12:09:26: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 44184Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:09:26: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 44184Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:09:26: ap2700> InjectClockError(WCLK_STUCK_LOW,534)... Info: msp430 : response=ERROR_INJECTED Info: 19-01-2011 12:09:29: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 44184Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:09:30: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 44184Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:09:32: ap2700> Sample rate set to: 43042Hz. Info: 19-01-2011 12:09:33: ap2700> Left channel amplitude is: -219,71dB and right channel amplitude is: -219,71dB. Info: 19-01-2011 12:09:33: ap2700> Sample rate set to: 44015Hz. Info: 19-01-2011 12:09:33: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0E) Info: 19-01-2011 12:09:34: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on MASTER_DUT. PASSED! Info: 19-01-2011 12:09:34: ap2700> GetStatusWord(SLAVE_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0C) Info: 19-01-2011 12:09:34: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on SLAVE_DUT. PASSED! Info: 19-01-2011 12:09:36: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 44015Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:09:36: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 44015Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:09:36: ap2700> InjectClockError(BCLK_STUCK_LOW,100)... Info: msp430 : response=ERROR_INJECTED Info: 19-01-2011 12:09:39: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 44015Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:09:39: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 44015Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:09:42: ap2700> Sample rate set to: 43184Hz. Info: 19-01-2011 12:09:43: ap2700> Left channel amplitude is: -219,71dB and right channel amplitude is: -219,71dB. Info: 19-01-2011 12:09:43: ap2700> Sample rate set to: 40201Hz. Info: 19-01-2011 12:09:43: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0F) Info: 19-01-2011 12:09:44: ap2700> ClearStatusWord(MASTER_DUT,1)... Info: msp430 : response=STATUS_WORD(0x8B0F) Info: 19-01-2011 12:09:44: access> S1 - C1 x C2 x C3 - Input sample rate changed - verifying that EVT_SR_CHG is set on MASTER_DUT. PASSED! Info: 19-01-2011 12:09:44: ap2700> GetStatusWord(SLAVE_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0D) Info: 19-01-2011 12:09:44: ap2700> ClearStatusWord(SLAVE_DUT,1)... Info: msp430 : response=STATUS_WORD(0x8B0D) Info: 19-01-2011 12:09:44: access> S1 - C1 x C2 x C3 - Input sample rate changed - verifying that EVT_SR_CHG is set on SLAVE_DUT. PASSED! Info: 19-01-2011 12:09:44: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0E) Info: 19-01-2011 12:09:44: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on MASTER_DUT. PASSED! Info: 19-01-2011 12:09:45: ap2700> GetStatusWord(SLAVE_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0C) Info: 19-01-2011 12:09:45: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on SLAVE_DUT. PASSED! Info: 19-01-2011 12:09:47: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 40201Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:09:47: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 40201Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:09:47: ap2700> InjectClockError(WCLK_STUCK_HIGH,382)... Info: msp430 : response=ERROR_INJECTED Info: 19-01-2011 12:09:50: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 40201Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:09:50: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 40201Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:09:53: ap2700> Sample rate set to: 39349Hz. Info: 19-01-2011 12:09:54: ap2700> Left channel amplitude is: -219,71dB and right channel amplitude is: -213,69dB. Info: 19-01-2011 12:09:54: ap2700> Sample rate set to: 47981Hz. Info: 19-01-2011 12:09:54: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0F) Info: 19-01-2011 12:09:55: ap2700> ClearStatusWord(MASTER_DUT,1)... Info: msp430 : response=STATUS_WORD(0x8B0F) Info: 19-01-2011 12:09:55: access> S1 - C1 x C2 x C3 - Input sample rate changed - verifying that EVT_SR_CHG is set on MASTER_DUT. PASSED! Info: 19-01-2011 12:09:55: ap2700> GetStatusWord(SLAVE_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0D) Info: 19-01-2011 12:09:55: ap2700> ClearStatusWord(SLAVE_DUT,1)... Info: msp430 : response=STATUS_WORD(0x8B0D) Info: 19-01-2011 12:09:55: access> S1 - C1 x C2 x C3 - Input sample rate changed - verifying that EVT_SR_CHG is set on SLAVE_DUT. PASSED! Info: 19-01-2011 12:09:55: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0E) Info: 19-01-2011 12:09:56: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on MASTER_DUT. PASSED! Info: 19-01-2011 12:09:56: ap2700> GetStatusWord(SLAVE_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0C) Info: 19-01-2011 12:09:56: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on SLAVE_DUT. PASSED! Info: 19-01-2011 12:09:58: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 47981Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:09:58: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 47981Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:09:58: ap2700> InjectClockError(WCLK_STUCK_LOW,160)... Info: msp430 : response=ERROR_INJECTED Info: 19-01-2011 12:10:01: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 47981Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:10:01: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 47981Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:10:04: ap2700> Sample rate set to: 47119Hz. Info: 19-01-2011 12:10:05: ap2700> Left channel amplitude is: -135,42dB and right channel amplitude is: -135,42dB. Info: 19-01-2011 12:10:05: ap2700> Sample rate set to: 40261Hz. Info: 19-01-2011 12:10:05: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0F) Info: 19-01-2011 12:10:06: ap2700> ClearStatusWord(MASTER_DUT,1)... Info: msp430 : response=STATUS_WORD(0x8B0F) Info: 19-01-2011 12:10:06: access> S1 - C1 x C2 x C3 - Input sample rate changed - verifying that EVT_SR_CHG is set on MASTER_DUT. PASSED! Info: 19-01-2011 12:10:06: ap2700> GetStatusWord(SLAVE_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0D) Info: 19-01-2011 12:10:06: ap2700> ClearStatusWord(SLAVE_DUT,1)... Info: msp430 : response=STATUS_WORD(0x8B0D) Info: 19-01-2011 12:10:06: access> S1 - C1 x C2 x C3 - Input sample rate changed - verifying that EVT_SR_CHG is set on SLAVE_DUT. PASSED! Info: 19-01-2011 12:10:06: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0E) Info: 19-01-2011 12:10:07: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on MASTER_DUT. PASSED! Info: 19-01-2011 12:10:07: ap2700> GetStatusWord(SLAVE_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0C) Info: 19-01-2011 12:10:07: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on SLAVE_DUT. PASSED! Info: 19-01-2011 12:10:09: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 40261Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:10:09: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 40261Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:10:10: ap2700> InjectClockError(BCLK_STUCK_LOW,326)... Info: msp430 : response=ERROR_INJECTED Info: 19-01-2011 12:10:12: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 40261Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:10:12: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 40261Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:10:15: ap2700> Sample rate set to: 40739Hz. Info: 19-01-2011 12:10:19: ap2700> Left channel amplitude is: -219,71dB and right channel amplitude is: -135,42dB. Info: 19-01-2011 12:10:20: ap2700> Sample rate set to: 40289Hz. Info: 19-01-2011 12:10:20: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0E) Info: 19-01-2011 12:10:20: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on MASTER_DUT. PASSED! Info: 19-01-2011 12:10:20: ap2700> GetStatusWord(SLAVE_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0C) Info: 19-01-2011 12:10:20: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on SLAVE_DUT. PASSED! Info: 19-01-2011 12:10:22: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 40289Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:10:23: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 40289Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:10:23: ap2700> InjectClockError(WCLK_GLITCH,458)... Info: msp430 : response=ERROR_INJECTED Info: 19-01-2011 12:10:25: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 40289Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:10:26: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 40289Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:10:29: ap2700> Sample rate set to: 40774Hz. Info: 19-01-2011 12:10:30: ap2700> Left channel amplitude is: -135,42dB and right channel amplitude is: -200,62dB. Info: 19-01-2011 12:10:30: ap2700> Sample rate set to: 44079Hz. Info: 19-01-2011 12:10:30: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0F) Info: 19-01-2011 12:10:30: ap2700> ClearStatusWord(MASTER_DUT,1)... Info: msp430 : response=STATUS_WORD(0x8B0F) Info: 19-01-2011 12:10:31: access> S1 - C1 x C2 x C3 - Input sample rate changed - verifying that EVT_SR_CHG is set on MASTER_DUT. PASSED! Info: 19-01-2011 12:10:31: ap2700> GetStatusWord(SLAVE_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0D) Info: 19-01-2011 12:10:31: ap2700> ClearStatusWord(SLAVE_DUT,1)... Info: msp430 : response=STATUS_WORD(0x8B0D) Info: 19-01-2011 12:10:32: access> S1 - C1 x C2 x C3 - Input sample rate changed - verifying that EVT_SR_CHG is set on SLAVE_DUT. PASSED! Info: 19-01-2011 12:10:32: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0E) Info: 19-01-2011 12:10:33: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on MASTER_DUT. PASSED! Info: 19-01-2011 12:10:34: ap2700> GetStatusWord(SLAVE_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0C) Info: 19-01-2011 12:10:34: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on SLAVE_DUT. PASSED! Info: 19-01-2011 12:10:36: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 44079Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:10:37: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 44079Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:10:37: ap2700> InjectClockError(WCLK_STUCK_HIGH,919)... Info: msp430 : response=ERROR_INJECTED Info: 19-01-2011 12:10:40: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 44079Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:10:41: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 44079Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:10:43: ap2700> Sample rate set to: 44896Hz. Info: 19-01-2011 12:10:44: ap2700> Left channel amplitude is: -219,71dB and right channel amplitude is: -135,42dB. Info: 19-01-2011 12:10:45: ap2700> Sample rate set to: 40210Hz. Info: 19-01-2011 12:10:45: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0F) Info: 19-01-2011 12:10:46: ap2700> ClearStatusWord(MASTER_DUT,1)... Info: msp430 : response=STATUS_WORD(0x8B0F) Info: 19-01-2011 12:10:46: access> S1 - C1 x C2 x C3 - Input sample rate changed - verifying that EVT_SR_CHG is set on MASTER_DUT. PASSED! Info: 19-01-2011 12:10:46: ap2700> GetStatusWord(SLAVE_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0D) Info: 19-01-2011 12:10:46: ap2700> ClearStatusWord(SLAVE_DUT,1)... Info: msp430 : response=STATUS_WORD(0x8B0D) Info: 19-01-2011 12:10:47: access> S1 - C1 x C2 x C3 - Input sample rate changed - verifying that EVT_SR_CHG is set on SLAVE_DUT. PASSED! Info: 19-01-2011 12:10:47: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0E) Info: 19-01-2011 12:10:47: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on MASTER_DUT. PASSED! Info: 19-01-2011 12:10:47: ap2700> GetStatusWord(SLAVE_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0C) Info: 19-01-2011 12:10:47: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on SLAVE_DUT. PASSED! Info: 19-01-2011 12:10:49: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 40210Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:10:50: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 40210Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:10:50: ap2700> InjectClockError(BCLK_GLITCH,694)... Info: msp430 : response=ERROR_INJECTED Info: 19-01-2011 12:10:54: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 40210Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:10:55: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 40210Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:10:57: ap2700> Sample rate set to: 41143Hz. Info: 19-01-2011 12:10:58: ap2700> Left channel amplitude is: -219,71dB and right channel amplitude is: -219,71dB. Info: 19-01-2011 12:10:59: ap2700> Sample rate set to: 32006Hz. Info: 19-01-2011 12:10:59: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0F) Info: 19-01-2011 12:10:59: ap2700> ClearStatusWord(MASTER_DUT,1)... Info: msp430 : response=STATUS_WORD(0x8B0F) Info: 19-01-2011 12:10:59: access> S1 - C1 x C2 x C3 - Input sample rate changed - verifying that EVT_SR_CHG is set on MASTER_DUT. PASSED! Info: 19-01-2011 12:10:59: ap2700> GetStatusWord(SLAVE_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0D) Info: 19-01-2011 12:11:00: ap2700> ClearStatusWord(SLAVE_DUT,1)... Info: msp430 : response=STATUS_WORD(0x8B0D) Info: 19-01-2011 12:11:00: access> S1 - C1 x C2 x C3 - Input sample rate changed - verifying that EVT_SR_CHG is set on SLAVE_DUT. PASSED! Info: 19-01-2011 12:11:00: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0E) Info: 19-01-2011 12:11:01: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on MASTER_DUT. PASSED! Info: 19-01-2011 12:11:01: ap2700> GetStatusWord(SLAVE_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0C) Info: 19-01-2011 12:11:01: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on SLAVE_DUT. PASSED! Info: 19-01-2011 12:11:03: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 32006Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:11:04: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 32006Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:11:05: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 32006Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:11:06: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 32006Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:11:09: ap2700> Sample rate set to: 31397Hz. Info: 19-01-2011 12:11:10: ap2700> Left channel amplitude is: -135,42dB and right channel amplitude is: -135,42dB. Info: 19-01-2011 12:11:10: ap2700> Sample rate set to: 44102Hz. Info: 19-01-2011 12:11:10: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0F) Info: 19-01-2011 12:11:10: ap2700> ClearStatusWord(MASTER_DUT,1)... Info: msp430 : response=STATUS_WORD(0x8B0F) Info: 19-01-2011 12:11:11: access> S1 - C1 x C2 x C3 - Input sample rate changed - verifying that EVT_SR_CHG is set on MASTER_DUT. PASSED! Info: 19-01-2011 12:11:11: ap2700> GetStatusWord(SLAVE_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0D) Info: 19-01-2011 12:11:11: ap2700> ClearStatusWord(SLAVE_DUT,1)... Info: msp430 : response=STATUS_WORD(0x8B0D) Info: 19-01-2011 12:11:11: access> S1 - C1 x C2 x C3 - Input sample rate changed - verifying that EVT_SR_CHG is set on SLAVE_DUT. PASSED! Info: 19-01-2011 12:11:11: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0E) Info: 19-01-2011 12:11:11: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on MASTER_DUT. PASSED! Info: 19-01-2011 12:11:12: ap2700> GetStatusWord(SLAVE_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0C) Info: 19-01-2011 12:11:12: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on SLAVE_DUT. PASSED! Info: 19-01-2011 12:11:14: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 44102Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:11:14: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 44102Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:11:14: ap2700> InjectClockError(BCLK_GLITCH,353)... Info: msp430 : response=ERROR_INJECTED Info: 19-01-2011 12:11:16: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 44102Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:11:17: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 44102Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:11:19: ap2700> Sample rate set to: 43557Hz. Info: 19-01-2011 12:11:21: ap2700> Left channel amplitude is: -219,71dB and right channel amplitude is: -219,71dB. Info: 19-01-2011 12:11:21: ap2700> Sample rate set to: 31967Hz. Info: 19-01-2011 12:11:21: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0F) Info: 19-01-2011 12:11:22: ap2700> ClearStatusWord(MASTER_DUT,1)... Info: msp430 : response=STATUS_WORD(0x8B0F) Info: 19-01-2011 12:11:22: access> S1 - C1 x C2 x C3 - Input sample rate changed - verifying that EVT_SR_CHG is set on MASTER_DUT. PASSED! Info: 19-01-2011 12:11:22: ap2700> GetStatusWord(SLAVE_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0D) Info: 19-01-2011 12:11:22: ap2700> ClearStatusWord(SLAVE_DUT,1)... Info: msp430 : response=STATUS_WORD(0x8B0D) Info: 19-01-2011 12:11:22: access> S1 - C1 x C2 x C3 - Input sample rate changed - verifying that EVT_SR_CHG is set on SLAVE_DUT. PASSED! Info: 19-01-2011 12:11:22: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0E) Info: 19-01-2011 12:11:23: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on MASTER_DUT. PASSED! Info: 19-01-2011 12:11:23: ap2700> GetStatusWord(SLAVE_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0C) Info: 19-01-2011 12:11:23: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on SLAVE_DUT. PASSED! Info: 19-01-2011 12:11:25: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 31967Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:11:26: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 31967Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:11:28: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 31967Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:11:28: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 31967Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:11:31: ap2700> Sample rate set to: 31544Hz. Info: 19-01-2011 12:11:32: ap2700> Left channel amplitude is: -213,69dB and right channel amplitude is: -194,13dB. Info: 19-01-2011 12:11:32: ap2700> Sample rate set to: 40273Hz. Info: 19-01-2011 12:11:32: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0F) Info: 19-01-2011 12:11:33: ap2700> ClearStatusWord(MASTER_DUT,1)... Info: msp430 : response=STATUS_WORD(0x8B0F) Info: 19-01-2011 12:11:33: access> S1 - C1 x C2 x C3 - Input sample rate changed - verifying that EVT_SR_CHG is set on MASTER_DUT. PASSED! Info: 19-01-2011 12:11:33: ap2700> GetStatusWord(SLAVE_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0D) Info: 19-01-2011 12:11:33: ap2700> ClearStatusWord(SLAVE_DUT,1)... Info: msp430 : response=STATUS_WORD(0x8B0D) Info: 19-01-2011 12:11:33: access> S1 - C1 x C2 x C3 - Input sample rate changed - verifying that EVT_SR_CHG is set on SLAVE_DUT. PASSED! Info: 19-01-2011 12:11:34: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0E) Info: 19-01-2011 12:11:34: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on MASTER_DUT. PASSED! Info: 19-01-2011 12:11:34: ap2700> GetStatusWord(SLAVE_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0C) Info: 19-01-2011 12:11:34: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on SLAVE_DUT. PASSED! Info: 19-01-2011 12:11:36: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 40273Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:11:36: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 40273Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:11:36: ap2700> InjectClockError(WCLK_STUCK_LOW,474)... Info: msp430 : response=ERROR_INJECTED Info: 19-01-2011 12:11:39: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 40273Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:11:40: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 40273Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:11:42: ap2700> Sample rate set to: 39555Hz. Info: 19-01-2011 12:11:43: ap2700> Left channel amplitude is: -135,42dB and right channel amplitude is: -219,71dB. Info: 19-01-2011 12:11:44: ap2700> Sample rate set to: 44040Hz. Info: 19-01-2011 12:11:44: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0F) Info: 19-01-2011 12:11:44: ap2700> ClearStatusWord(MASTER_DUT,1)... Info: msp430 : response=STATUS_WORD(0x8B0F) Info: 19-01-2011 12:11:44: access> S1 - C1 x C2 x C3 - Input sample rate changed - verifying that EVT_SR_CHG is set on MASTER_DUT. PASSED! Info: 19-01-2011 12:11:44: ap2700> GetStatusWord(SLAVE_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0D) Info: 19-01-2011 12:11:44: ap2700> ClearStatusWord(SLAVE_DUT,1)... Info: msp430 : response=STATUS_WORD(0x8B0D) Info: 19-01-2011 12:11:45: access> S1 - C1 x C2 x C3 - Input sample rate changed - verifying that EVT_SR_CHG is set on SLAVE_DUT. PASSED! Info: 19-01-2011 12:11:45: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0E) Info: 19-01-2011 12:11:45: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on MASTER_DUT. PASSED! Info: 19-01-2011 12:11:45: ap2700> GetStatusWord(SLAVE_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0C) Info: 19-01-2011 12:11:45: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on SLAVE_DUT. PASSED! Info: 19-01-2011 12:11:47: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 44040Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:11:47: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 44040Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:11:49: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 44040Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:11:50: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 44040Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:11:53: ap2700> Sample rate set to: 44810Hz. Info: 19-01-2011 12:11:57: ap2700> Left channel amplitude is: -135,42dB and right channel amplitude is: -135,42dB. Info: 19-01-2011 12:11:57: ap2700> Sample rate set to: 40211Hz. Info: 19-01-2011 12:11:57: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0F) Info: 19-01-2011 12:11:57: ap2700> ClearStatusWord(MASTER_DUT,1)... Info: msp430 : response=STATUS_WORD(0x8B0F) Info: 19-01-2011 12:11:58: access> S1 - C1 x C2 x C3 - Input sample rate changed - verifying that EVT_SR_CHG is set on MASTER_DUT. PASSED! Info: 19-01-2011 12:11:58: ap2700> GetStatusWord(SLAVE_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0D) Info: 19-01-2011 12:11:58: ap2700> ClearStatusWord(SLAVE_DUT,1)... Info: msp430 : response=STATUS_WORD(0x8B0D) Info: 19-01-2011 12:11:58: access> S1 - C1 x C2 x C3 - Input sample rate changed - verifying that EVT_SR_CHG is set on SLAVE_DUT. PASSED! Info: 19-01-2011 12:11:58: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0E) Info: 19-01-2011 12:11:58: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on MASTER_DUT. PASSED! Info: 19-01-2011 12:11:59: ap2700> GetStatusWord(SLAVE_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0C) Info: 19-01-2011 12:11:59: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on SLAVE_DUT. PASSED! Info: 19-01-2011 12:12:01: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 40211Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:12:01: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 40211Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:12:01: ap2700> InjectClockError(BCLK_STUCK_HIGH,460)... Info: msp430 : response=ERROR_INJECTED Info: 19-01-2011 12:12:04: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 40211Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:12:04: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 40211Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:12:07: ap2700> Sample rate set to: 40989Hz. Info: 19-01-2011 12:12:08: ap2700> Left channel amplitude is: -219,71dB and right channel amplitude is: -219,71dB. Info: 19-01-2011 12:12:08: ap2700> Sample rate set to: 44015Hz. Info: 19-01-2011 12:12:08: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0F) Info: 19-01-2011 12:12:09: ap2700> ClearStatusWord(MASTER_DUT,1)... Info: msp430 : response=STATUS_WORD(0x8B0F) Info: 19-01-2011 12:12:09: access> S1 - C1 x C2 x C3 - Input sample rate changed - verifying that EVT_SR_CHG is set on MASTER_DUT. PASSED! Info: 19-01-2011 12:12:09: ap2700> GetStatusWord(SLAVE_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0D) Info: 19-01-2011 12:12:09: ap2700> ClearStatusWord(SLAVE_DUT,1)... Info: msp430 : response=STATUS_WORD(0x8B0D) Info: 19-01-2011 12:12:10: access> S1 - C1 x C2 x C3 - Input sample rate changed - verifying that EVT_SR_CHG is set on SLAVE_DUT. PASSED! Info: 19-01-2011 12:12:10: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0E) Info: 19-01-2011 12:12:10: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on MASTER_DUT. PASSED! Info: 19-01-2011 12:12:10: ap2700> GetStatusWord(SLAVE_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0C) Info: 19-01-2011 12:12:10: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on SLAVE_DUT. PASSED! Info: 19-01-2011 12:12:12: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 44015Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:12:12: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 44015Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:12:13: ap2700> InjectClockError(WCLK_STUCK_LOW,74)... Info: msp430 : response=ERROR_INJECTED Info: 19-01-2011 12:12:14: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 44015Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:12:15: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 44015Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:12:18: ap2700> Sample rate set to: 43513Hz. Info: 19-01-2011 12:12:19: ap2700> Left channel amplitude is: -219,71dB and right channel amplitude is: -135,42dB. Info: 19-01-2011 12:12:19: ap2700> Sample rate set to: 31936Hz. Info: 19-01-2011 12:12:19: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0F) Info: 19-01-2011 12:12:19: ap2700> ClearStatusWord(MASTER_DUT,1)... Info: msp430 : response=STATUS_WORD(0x8B0F) Info: 19-01-2011 12:12:20: access> S1 - C1 x C2 x C3 - Input sample rate changed - verifying that EVT_SR_CHG is set on MASTER_DUT. PASSED! Info: 19-01-2011 12:12:20: ap2700> GetStatusWord(SLAVE_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0D) Info: 19-01-2011 12:12:20: ap2700> ClearStatusWord(SLAVE_DUT,1)... Info: msp430 : response=STATUS_WORD(0x8B0D) Info: 19-01-2011 12:12:20: access> S1 - C1 x C2 x C3 - Input sample rate changed - verifying that EVT_SR_CHG is set on SLAVE_DUT. PASSED! Info: 19-01-2011 12:12:20: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0E) Info: 19-01-2011 12:12:20: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on MASTER_DUT. PASSED! Info: 19-01-2011 12:12:21: ap2700> GetStatusWord(SLAVE_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0C) Info: 19-01-2011 12:12:21: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on SLAVE_DUT. PASSED! Info: 19-01-2011 12:12:23: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 31936Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:12:23: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 31936Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:12:23: ap2700> InjectClockError(BCLK_GLITCH,657)... Info: msp430 : response=ERROR_INJECTED Info: 19-01-2011 12:12:26: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 31936Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:12:27: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 31936Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:12:29: ap2700> Sample rate set to: 32680Hz. Info: 19-01-2011 12:12:30: ap2700> Left channel amplitude is: -135,42dB and right channel amplitude is: -135,42dB. Info: 19-01-2011 12:12:31: ap2700> Sample rate set to: 31961Hz. Info: 19-01-2011 12:12:31: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0E) Info: 19-01-2011 12:12:31: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on MASTER_DUT. PASSED! Info: 19-01-2011 12:12:31: ap2700> GetStatusWord(SLAVE_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0C) Info: 19-01-2011 12:12:31: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on SLAVE_DUT. PASSED! Info: 19-01-2011 12:12:33: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 31961Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:12:33: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 31961Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:12:34: ap2700> InjectClockError(BCLK_STUCK_LOW,454)... Info: msp430 : response=ERROR_INJECTED Info: 19-01-2011 12:12:36: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 31961Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:12:37: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 31961Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:12:39: ap2700> Sample rate set to: 31667Hz. Info: 19-01-2011 12:12:40: ap2700> Left channel amplitude is: -135,42dB and right channel amplitude is: -135,42dB. Info: 19-01-2011 12:12:40: ap2700> Sample rate set to: 44175Hz. Info: 19-01-2011 12:12:41: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0F) Info: 19-01-2011 12:12:41: ap2700> ClearStatusWord(MASTER_DUT,1)... Info: msp430 : response=STATUS_WORD(0x8B0F) Info: 19-01-2011 12:12:41: access> S1 - C1 x C2 x C3 - Input sample rate changed - verifying that EVT_SR_CHG is set on MASTER_DUT. PASSED! Info: 19-01-2011 12:12:41: ap2700> GetStatusWord(SLAVE_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0D) Info: 19-01-2011 12:12:42: ap2700> ClearStatusWord(SLAVE_DUT,1)... Info: msp430 : response=STATUS_WORD(0x8B0D) Info: 19-01-2011 12:12:42: access> S1 - C1 x C2 x C3 - Input sample rate changed - verifying that EVT_SR_CHG is set on SLAVE_DUT. PASSED! Info: 19-01-2011 12:12:42: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0E) Info: 19-01-2011 12:12:42: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on MASTER_DUT. PASSED! Info: 19-01-2011 12:12:42: ap2700> GetStatusWord(SLAVE_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0C) Info: 19-01-2011 12:12:42: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on SLAVE_DUT. PASSED! Info: 19-01-2011 12:12:44: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 44175Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:12:44: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 44175Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:12:45: ap2700> InjectClockError(BCLK_GLITCH,90)... Info: msp430 : response=ERROR_INJECTED Info: 19-01-2011 12:12:46: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 44175Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:12:47: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 44175Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:12:50: ap2700> Sample rate set to: 44736Hz. Info: 19-01-2011 12:12:51: ap2700> Left channel amplitude is: -219,71dB and right channel amplitude is: -135,42dB. Info: 19-01-2011 12:12:51: ap2700> Sample rate set to: 40274Hz. Info: 19-01-2011 12:12:51: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0F) Info: 19-01-2011 12:12:52: ap2700> ClearStatusWord(MASTER_DUT,1)... Info: msp430 : response=STATUS_WORD(0x8B0F) Info: 19-01-2011 12:12:52: access> S1 - C1 x C2 x C3 - Input sample rate changed - verifying that EVT_SR_CHG is set on MASTER_DUT. PASSED! Info: 19-01-2011 12:12:52: ap2700> GetStatusWord(SLAVE_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0D) Info: 19-01-2011 12:12:52: ap2700> ClearStatusWord(SLAVE_DUT,1)... Info: msp430 : response=STATUS_WORD(0x8B0D) Info: 19-01-2011 12:12:52: access> S1 - C1 x C2 x C3 - Input sample rate changed - verifying that EVT_SR_CHG is set on SLAVE_DUT. PASSED! Info: 19-01-2011 12:12:52: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0E) Info: 19-01-2011 12:12:53: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on MASTER_DUT. PASSED! Info: 19-01-2011 12:12:53: ap2700> GetStatusWord(SLAVE_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0C) Info: 19-01-2011 12:12:53: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on SLAVE_DUT. PASSED! Info: 19-01-2011 12:12:55: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 40274Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:12:55: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 40274Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:12:55: ap2700> InjectClockError(WCLK_STUCK_LOW,330)... Info: msp430 : response=ERROR_INJECTED Info: 19-01-2011 12:12:58: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 40274Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:12:58: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 40274Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:13:01: ap2700> Sample rate set to: 39581Hz. Info: 19-01-2011 12:13:02: ap2700> Left channel amplitude is: -185,56dB and right channel amplitude is: -219,71dB. Info: 19-01-2011 12:13:02: ap2700> Sample rate set to: 40344Hz. Info: 19-01-2011 12:13:02: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0E) Info: 19-01-2011 12:13:03: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on MASTER_DUT. PASSED! Info: 19-01-2011 12:13:03: ap2700> GetStatusWord(SLAVE_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0C) Info: 19-01-2011 12:13:03: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on SLAVE_DUT. PASSED! Info: 19-01-2011 12:13:05: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 40344Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:13:06: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 40344Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:13:06: ap2700> InjectClockError(WCLK_GLITCH,444)... Info: msp430 : response=ERROR_INJECTED Info: 19-01-2011 12:13:08: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 40344Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:13:09: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 40344Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:13:12: ap2700> Sample rate set to: 39398Hz. Info: 19-01-2011 12:13:13: ap2700> Left channel amplitude is: -135,42dB and right channel amplitude is: -219,71dB. Info: 19-01-2011 12:13:13: ap2700> Sample rate set to: 44060Hz. Info: 19-01-2011 12:13:13: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0F) Info: 19-01-2011 12:13:14: ap2700> ClearStatusWord(MASTER_DUT,1)... Info: msp430 : response=STATUS_WORD(0x8B0F) Info: 19-01-2011 12:13:14: access> S1 - C1 x C2 x C3 - Input sample rate changed - verifying that EVT_SR_CHG is set on MASTER_DUT. PASSED! Info: 19-01-2011 12:13:14: ap2700> GetStatusWord(SLAVE_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0D) Info: 19-01-2011 12:13:14: ap2700> ClearStatusWord(SLAVE_DUT,1)... Info: msp430 : response=STATUS_WORD(0x8B0D) Info: 19-01-2011 12:13:14: access> S1 - C1 x C2 x C3 - Input sample rate changed - verifying that EVT_SR_CHG is set on SLAVE_DUT. PASSED! Info: 19-01-2011 12:13:14: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0E) Info: 19-01-2011 12:13:15: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on MASTER_DUT. PASSED! Info: 19-01-2011 12:13:15: ap2700> GetStatusWord(SLAVE_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0C) Info: 19-01-2011 12:13:15: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on SLAVE_DUT. PASSED! Info: 19-01-2011 12:13:17: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 44060Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:13:17: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 44060Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:13:17: ap2700> InjectClockError(BCLK_STUCK_LOW,257)... Info: msp430 : response=ERROR_INJECTED Info: 19-01-2011 12:13:20: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 44060Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:13:20: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 44060Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:13:23: ap2700> Sample rate set to: 43725Hz. Info: 19-01-2011 12:13:24: ap2700> Left channel amplitude is: -191,08dB and right channel amplitude is: -210,17dB. Info: 19-01-2011 12:13:24: ap2700> Sample rate set to: 40322Hz. Info: 19-01-2011 12:13:25: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0F) Info: 19-01-2011 12:13:25: ap2700> ClearStatusWord(MASTER_DUT,1)... Info: msp430 : response=STATUS_WORD(0x8B0F) Info: 19-01-2011 12:13:25: access> S1 - C1 x C2 x C3 - Input sample rate changed - verifying that EVT_SR_CHG is set on MASTER_DUT. PASSED! Info: 19-01-2011 12:13:25: ap2700> GetStatusWord(SLAVE_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0D) Info: 19-01-2011 12:13:25: ap2700> ClearStatusWord(SLAVE_DUT,1)... Info: msp430 : response=STATUS_WORD(0x8B0D) Info: 19-01-2011 12:13:26: access> S1 - C1 x C2 x C3 - Input sample rate changed - verifying that EVT_SR_CHG is set on SLAVE_DUT. PASSED! Info: 19-01-2011 12:13:26: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0E) Info: 19-01-2011 12:13:26: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on MASTER_DUT. PASSED! Info: 19-01-2011 12:13:26: ap2700> GetStatusWord(SLAVE_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0C) Info: 19-01-2011 12:13:26: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on SLAVE_DUT. PASSED! Info: 19-01-2011 12:13:28: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 40322Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:13:29: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 40322Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:13:29: ap2700> InjectClockError(WCLK_STUCK_HIGH,235)... Info: msp430 : response=ERROR_INJECTED Info: 19-01-2011 12:13:31: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 40322Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:13:31: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 40322Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:13:34: ap2700> Sample rate set to: 39797Hz. Info: 19-01-2011 12:13:35: ap2700> Left channel amplitude is: -219,71dB and right channel amplitude is: -219,71dB. Info: 19-01-2011 12:13:35: ap2700> Sample rate set to: 40201Hz. Info: 19-01-2011 12:13:35: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0E) Info: 19-01-2011 12:13:36: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on MASTER_DUT. PASSED! Info: 19-01-2011 12:13:36: ap2700> GetStatusWord(SLAVE_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0C) Info: 19-01-2011 12:13:36: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on SLAVE_DUT. PASSED! Info: 19-01-2011 12:13:38: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 40201Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:13:38: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 40201Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:13:39: ap2700> InjectClockError(BCLK_GLITCH,206)... Info: msp430 : response=ERROR_INJECTED Info: 19-01-2011 12:13:41: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 40201Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:13:41: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 40201Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:13:44: ap2700> Sample rate set to: 40985Hz. Info: 19-01-2011 12:13:45: ap2700> Left channel amplitude is: -219,71dB and right channel amplitude is: -219,71dB. Info: 19-01-2011 12:13:45: ap2700> Sample rate set to: 44175Hz. Info: 19-01-2011 12:13:45: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0F) Info: 19-01-2011 12:13:46: ap2700> ClearStatusWord(MASTER_DUT,1)... Info: msp430 : response=STATUS_WORD(0x8B0F) Info: 19-01-2011 12:13:46: access> S1 - C1 x C2 x C3 - Input sample rate changed - verifying that EVT_SR_CHG is set on MASTER_DUT. PASSED! Info: 19-01-2011 12:13:46: ap2700> GetStatusWord(SLAVE_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0D) Info: 19-01-2011 12:13:46: ap2700> ClearStatusWord(SLAVE_DUT,1)... Info: msp430 : response=STATUS_WORD(0x8B0D) Info: 19-01-2011 12:13:46: access> S1 - C1 x C2 x C3 - Input sample rate changed - verifying that EVT_SR_CHG is set on SLAVE_DUT. PASSED! Info: 19-01-2011 12:13:46: ap2700> GetStatusWord(MASTER_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0E) Info: 19-01-2011 12:13:47: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on MASTER_DUT. PASSED! Info: 19-01-2011 12:13:47: ap2700> GetStatusWord(SLAVE_DUT)... Info: msp430 : response=STATUS_WORD(0x8B0C) Info: 19-01-2011 12:13:47: access> S1 - C1 x C2 x C3 - System is stable - verifying that EVT_SR_CHG is cleared on SLAVE_DUT. PASSED! Info: 19-01-2011 12:13:49: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 44175Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:13:49: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 44175Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:13:49: ap2700> InjectClockError(WCLK_STUCK_HIGH,543)... Info: msp430 : response=ERROR_INJECTED Info: 19-01-2011 12:13:52: access> S1 - C1 x C2 x C3 - Measuring THD+N on i2s_in vs. i2s_out @ 44175Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:13:52: access> S1 - C1 x C2 x C3 - Measuring output amplitude on i2s_out @ 44175Hz sample rate (PCM16, PCM16, stereo input, stereo speaker). PASSED! Info: 19-01-2011 12:13:55: ap2700> Sample rate set to: 43300Hz. Info: 19-01-2011 12:13:56: ap2700> Left channel amplitude is: -219,71dB and right channel amplitude is: -164,41dB. Info: 19-01-2011 12:13:56: access> S1 - C1 x C2 x C3 - Random input sample rates (within spec) vs random clock dropout vs. EHIF status word. PASSED! ]]>